Withdrawal Sleeves

SKR Withdrawal Sleeves Are Manufactured On CNC Machine for Precision and Requisite Surface Finish. They Have External Taper Of 1:12 Except For AH 240 Series And AH 241 Series Which Have An External Taper Of 1:30 Which Can Be Used With Spherical Roller Bearings Of Series 240- -K30 And 241 - -K30. Standard Withdrawal Sleeves Are Manufactured From C20 C30 Carbon Steel Material. The Dimensions Are In Accordance With ISO 113/1-1979 Wherever Applicable.

Withdrawal Sleeves Are Used For Mounting Bearing With Taper Inner Race On The Shaft. It Is Very Easy To Locate Bearing At Desired Space On The Shaft With Se Of Withdrawal Sleeve, Which Is Pushed Hard Into The Bearing To Attain Very Tight Assembly. Removal Of Bearing From Assembly Becomes Very Easy With Withdrawal Sleeve; The Shoulder End Of Withdrawal Sleeve Is Provided Threads Suitable To Fit KM And HM Series Lock Nuts. During Dismounting, The Locknut Is Mounted On Threads Of Withdrawal Sleeve And Locknut Is Rotated With Spanner To Butt Against Bearing Side To Push Withdrawal Sleeve Out Easily On The Shaft.

Withdrawal Sleeve Have Found Their Greater Application In Railway Coach Wheel Or In Drives In Paper Industry Where The Maintenance Down Time Should Be Minimum.

SKR Withdrawal Sleeve Having A Bore Diameter Of 200 Mm And Above Are Supplied As Standard Design As Well As Also With Oil Injection Grooves And Holes For Use Of Hydraulic Pressure To Remove The Withdrawal Sleeve From Bearing Assembly. Such Type Is Designated As "AOH" And It Has Two Oil Supply Ducts At The Threaded Shoulder Side And Have Distribution Grooves Around The Circumference And In Axial Direction On The Outer Side As Well As Inside Surface Of The Withdrawal Sleeve. Hydraulic Oil Is Injected At Very Heavy Pressure At The Time Of Dismount These Withdrawal Sleeves From Bearing And Shaft Assembly. This Method Is Very Useful For Heavy Bearings.